Omron CJ - REFERENCE MANUAL 10-2009 Reference Manual page 18

Functions Supported for Unit Version 3.0 or Later
CS1-H CPU Units
Function blocks
Serial Gateway (converting FINS commands to CompoWay/F
commands at the built-in serial port)
Comment memory (in internal flash memory)
Expanded simple backup data
New application TXDU(256), RXDU(255) (support no-protocol
instructions communications with Serial Communications
Units with unit version 1.2 or later)
Model conversion instructions: XFERC(565),
DISTC(566), COLLC(567), MOVBC(568),
BCNTC(621)
Special function block instructions: GETID(286)
Additional TXD(235) and RXD(236) instructions (support
instruction func- no-protocol communications with Serial Commu-
tions nications Boards with unit version 1.2 or later)
CS1D CPU Units
CJ1-H/CJ1M CPU Units
Function blocks
Serial Gateway (converting FINS commands to CompoWay/F
commands at the built-in serial port)
Comment memory (in internal flash memory)
Expanded simple backup data
New application TXDU(256), RXDU(255) (support no-protocol
instructions communications with Serial Communications
Units with unit version 1.2 or later)
Model conversion instructions: XFERC(565),
DISTC(566), COLLC(567), MOVBC(568),
BCNTC(621)
Special function block instructions: GETID(286)
Additional PRV(881) and PRV2(883) instructions: Added
instruction func- high-frequency calculation methods for calculat-
tions ing pulse frequency. (CJ1M CPU Units only)
xviii
CX-Programmer 5.0 or higher must be used to enable using the functions
added for unit version 3.0.
Function
Unit version 3.0 is not supported.
Function
CS1@-CPU@@H
Unit version 3.0 or Other unit versions
later
OK ---
OK ---
OK ---
OK ---
OK ---
OK ---
OK ---
OK ---
CJ1H-CPU@@H-R, CJ1@-CPU@@H,
CJ1G-CPU@@P, CJ1M-CPU@@
Unit version 3.0 or Other unit versions
later
OK ---
OK ---
OK ---
OK ---
OK ---
OK ---
OK ---
OK ---
CS/CJ/NSJ Series Instructions Reference Manual (W474)