Omron C200H Specification page 13

Position Control Unit
Combinations of Servo Relay Units, Servodrivers, and Position Control Units
Connecting cable on
Position Control Unit
PCU end
Single-axis Position
Connecting cable
Control Unit for C200HS
for C200H-NC113
C200HW-NC113
XW2Z-jjjJ-Aj
Connecting cable for
2/4-axis Position Control
C200H-NC213/413
Unit for C200HS
(see note 1)
C200HW-NC213/413
XW2Z-jjjJ-Aj
12
Servo Relay Unit
Servo Relay Unit
for C200H-NC113
XW2B-20J6-1B
Servo Relay Unit for
C200H-NC213/413
(see note 1)
XW2B-40J6-2B
Note: 1. Two cables or Units are requIred for
4-axis PCUs.
Product Specifications
Connecting cable on
Servodriver end
Servodriver
(See note 2)
Connecting cable
U-Series Servodriver
for U-Series
R88D-UPjjj
XW2Z-jjjJ-B1
(See note 2)
Connecting cable
M-Series Servodriver
for M-Series
XW2Z-jjjJ-B2 R88D-MTjjj
(See note 2)
Connecting cable
H-Series Servodriver
for H-Series
XW2Z-jjjJ-B3 R88D-Hjjj
2. When the Servodriver is combined with the C200HW-NC213 (2-axis), two
connecting cables are required on the Servodriver end. When the Servo-
driver is combined with the C200HW-NC413 (4-axis), four connecting
cables are required on the Servodriver end.