Specifications - Omron A16 Datasheet

Specifications

■ Approved Standards
Agency
UL, cUL (See note.)
---
Note: cUL: CSA, C22.2 No. 14
■ Approved Standard Ratings
UL, cUL (File No. E41515)
5 A at 125 VAC, 3 A at 250 VAC (general use)
3 A at 30 VDC (resistive)
EN60947-5-1 (Low Voltage Directive)
3 A at 250 VAC (AC12), 3 A at 30 VDC (DC12)
■ Ratings
Contacts
AC resistive load
3 A at 250 VAC
5 A at 125 VAC
Minimum applicable load: 1 mA at 5 VDC
Rated values are obtained from tests conducted under the following
conditions.
1. Load: Resistive load
2. Mounting conditions: No vibration and no shock
3. Temperature: 20 2 C
4. Operating frequency: 20 operations/min
■ Characteristics
Item
Allowable operating fre- Mechanical
quency
Electrical
Insulation resistance
Dielectric strength
Vibration resistance Malfunction
Shock resistance Mechanical
Malfunction
Durability Mechanical
Electrical
Ambient temperature
Ambient humidity
Electric shock protection class
PTI (tracking characteristic)
Degree of contamination
Weight
Note: 1. Set and reset constitute one operation.
2. With LED and incandescent lamp not mounted.
G-18
Pushbutton Switch
UL508
EN60947-5-1
DC resistive load
3 A at 30 VDC
Momentary operation:
Alternate operation:
20 operations/minute max. (See note 1.)
100 M min. (at 500 VDC)
1,000 VAC, 50/60 Hz for 1 min between terminals of same polarity
2,000 VAC, 50/60 Hz for 1 min between terminals of different polarity and also between each terminal and ground
1,000 VAC, 50/60 Hz for 1 min between lamp terminals (See note 2.)
10 to 55 Hz, 1.5-mm double amplitude (malfunction within 1 ms)
2
500 m/s
2
150 m/s max. (malfunction within 1 ms)
Momentary operation:
Alternate operation:
100,000 operations min. (See note 1.)
Operating: –10 C to 55 C (with no icing or condensation)
Storage: –25 C to 65 C (with no icing or condensation)
Operating: 35% to 85%
Class II
175
3 (IEC947-5-1)
Approx. 10 g (in the case of a lighted DPDT switch with solder terminals)
A16
Standards
Super-bright LED
Rated Rated current
voltage
5 VDC 30 mA (15 mA)
12 VDC 15 mA
24 VDC 10 mA
Note: The values in parentheses are for models with blue Pushbut-
tons.
Incandescent Lamp
Rated voltage
6 VAC/VDC
14 VAC/VDC
28 VAC/VDC
Pushbutton Switch
120 operations/minute max. (See note 1.)
60 operations/minute max. (See note 1.)
2,000,000 operations min.
200,000 operations min. (See note 1.)
File No.
E41515
---
Operating Internal limiting
voltage
5 VDC 5% 33
12 VDC 5% 270
24 VDC 5% 1600
Rated current Operating voltage
60 mA 5 VAC/VDC
40 mA 12 VAC/VDC
24 mA 24 VAC/VDC
resistor
(68 )
(560 )
(2,000 )