Table of Contents
Advertisement
User's & Administrator's Manual
4.3
Restoring RXV81 Firmware via USB Disk
For recovery purposes, f irmware can be applied to RXV81 f rom a USB disk.
➢
To apply the firmware from the USB disk:
1.
Enter recovery mode by pressing f or 2-4 seconds the power button as shown in
above (Action: ENTER_RECOVERY); the device's LED lights up red.
2.
Short-press the power button to move down the menu options, and long -press to select an
option.
3.
Insert the USB disk with the target f irmware.
4.
Select the Apply update from USB disk option and then choose the correct f irmware image
f rom the disk.
4.4
User Settings
In the 'Settings' screen you can optionally conf igure the f ollowing User settings: Sound ,
Accessibility, Reboot and About (read-only).
4.4.1
Setting the Volume
You can customize phone volume f or a f riendlier user experience.
4.4.2
Configuring Accessibility Settings
This option allows users to customize the screen to be reader-f riendlier.
➢
To configure the Accessibility setting:
Under 'User', navigate to and select Accessibili ty.
1.
2.
Adjust the settings to suit personal requirements.
Version 2.4
35
4. Conf iguring RXV81 Settings
Table 4-1
RXV81 USB Peripheral
Advertisement
Table of Contents
Need help?
Do you have a question about the RXV81 USB Peripheral and is the answer not in the manual?
Questions and answers