Reset Configuration; Debug Recording; Erase All Data (Factory Reset) - AudioCodes RXV81 USB Peripheral User Manual

4.1.6.3

Reset configuration

Admin users can opt to 'clean up' their conf iguration history and return RXV81 to an Out of Box
Experience (OOBE).
➢
To reset the configuration:
1. Navigate to and select Reset configuration.
2. Navigate to and select OK; all data is erased and def ault f actory settings are restored but sign-
in is retained.
See also here.
4.1.6.4

Debug Recording

This f eature enables Admin users to perf orm media/DSP debugging.
Note: DSP recording can be activated on the f ly without requiring the network administrator to
reset the phone.
➢
To reset the configuration:
1. Navigate to and select Debug Recording.
2. Navigate to and select Voice record to enable the f eature.
3. Navigate to and select Remote IP address to input the IP address of the device whose traffic
you want to record.
4. Navigate to and select Remote port and input it (Def ault: 5000).
5. Start Wireshark on your PC to capture audio traf f ic.
4.1.6.5

Erase all data (factory reset)

This option is the equivalent of restore to def aults, including logout and device reboot.
➢
To erase all data (factory reset):
1. Navigate to and select Erase all data (f actory reset).
User's & Administrator's Manual 32
RXV81 USB Peripheral
Document #: LTRT-18260