Care And Maintenance; Tips And Tricks; Declaration Of Conformity - Parkside PEBS 900 -2002 Manual

Material / type of work
Removing paint/varnish
Smoothing varnish
Removing rust
Plastic
Non-ferrous metals
(e.g. aluminium)

CARE AND MAINTENANCE

ATTENTION: Before you carry out any work on the belt sander always pull the plug out of the mains socket.
1) Clean the belt sander regularly. The best time is immediately after you have finished working with it.
2) Do not use any sharp objects to clean the belt sander. Do not allow any liquids to enter the belt sander. Use a moist cloth
to clean the housing - never use petrol, solvents or cleaners that attack plastic.
3) Always keep the ventilation slots clear.
4) Remove any adhered sanding dust using a narrow paint brush. Unscrew the protective cover (6) from time to time and carefully clean out
the dust channels to ensure optimum dust extraction.

TIPS AND TRICKS

• Never use the same sanding belt to sand wood and metal.
• Worn or ripped sanding belts can damage the workpiece. Make sure you change the sanding belt at the appropriate time.
• Keep the sanding belt properly tensioned so that it does not hang down too much and become unusable due to knicks, creases etc.
You can find further practical tips in the accompanying booklet "Safety Advice".
We reserve the right to make technical modifications in the course of further development.

DECLARATION OF CONFORMITY

We, Kompernaß Handelsgesellschaft mbH, Burgstr. 21, D-44867 Bochum, hereby declare that this product complies with the
following EU directives:
Machinery directive:
Low voltage directive:
Electromagnetic compatibility:
Applicable harmonised standards:
Brand, description of the machine:
Bochum, 30.09.2002
Hans Kompernaß
- Managing Director -
Coarse sanding (grit)
060
150
040
120
080
98/37 EC
73/23 EEC
89/336 EEC
EN 55014-1, EN 61000-3-2, EN 61000-3-3, EN 55014-2
PARKSIDE PEBS 900 BELT SANDER
7
Fine sanding (grit)
––
320
120
240
150
Speed
high (5-6)
low (1-2)
medium/high (3-4)
low/medium (2-3)
medium/high (3-4)