EVAL_TDA38825_1VOUT user guide
User guide for TDA38825 evaluation board
Important notice
Important notice
"Evaluation Boards and Reference Boards" shall mean products embedded on a printed circuit
board (PCB) for demonstration and/or evaluation purposes, which include, without limitation,
demonstration, reference and evaluation boards, kits and design (collectively referred to as
"Reference Board").
Environmental conditions have been considered in the design of the Evaluation Boards and
Reference Boards provided by Infineon Technologies. The design of the Evaluation Boards and
Reference Boards has been tested by Infineon Technologies only as described in this document.
The design is not qualified in terms of safety requirements, manufacturing and operation over the
entire operating temperature range or lifetime.
The Evaluation Boards and Reference Boards provided by Infineon Technologies are subject to
functional testing only under typical load conditions. Evaluation Boards and Reference Boards
are not subject to the same procedures as regular products regarding returned material analysis
(RMA), process change notification (PCN) and product discontinuation (PD).
Evaluation Boards and Reference Boards are not commercialized products, and are solely
intended for evaluation and testing purposes. In particular, they shall not be used for reliability
testing or production. The Evaluation Boards and Reference Boards may therefore not comply
with CE or similar standards (including but not limited to the EMC Directive 2004/EC/108 and the
EMC Act) and may not fulfill other requirements of the country in which they are operated by the
customer. The customer shall ensure that all Evaluation Boards and Reference Boards will be
handled in a way which is compliant with the relevant requirements and standards of the country
in which they are operated.
The Evaluation Boards and Reference Boards as well as the information provided in this
document are addressed only to qualified and skilled technical staff, for laboratory usage, and
shall be used and managed according to the terms and conditions set forth in this document and
in other related documentation supplied with the respective Evaluation Board or Reference
Board.
It is the responsibility of the customer's technical departments to evaluate the suitability of the
Evaluation Boards and Reference Boards for the intended application, and to evaluate the
completeness and correctness of the information provided in this document with respect to such
application.
The customer is obliged to ensure that the use of the Evaluation Boards and Reference Boards
does not cause any harm to persons or third party property.
The Evaluation Boards and Reference Boards and any information in this document is provided
"as is" and Infineon Technologies disclaims any warranties, express or implied, including but not
limited to warranties of non-infringement of third party rights and implied warranties of fitness
for any purpose, or for merchantability.
Infineon Technologies shall not be responsible for any damages resulting from the use of the
Evaluation Boards and Reference Boards and/or from any information provided in this document.
The customer is obliged to defend, indemnify and hold Infineon Technologies harmless from and
against any claims or damages arising out of or resulting from any use thereof.
Infineon Technologies reserves the right to modify this document and/or any information
provided herein at any time without further notice.
User Guide
2
V 1.0
2023-07-21
Need help?
Do you have a question about the EVAL TDA38825 1VOUT and is the answer not in the manual?