Lamp HG-JHS9 Series Installation Instructions

HG-JHS9 DAMPER HINGE INSTALLATION INSTRUCTIONS
Thank you for using our product. Before installation, please read this manual thoroughly to ensure
correct installation. Please keep this manual at hand for future reference.
ABOUT THE PRODUCT
●Features: ・Small damper hinge with self-opening function for top-opening lids .
・Use with a push-latch enables pop-up function of the lid.
●Use: Small covers for desktop sockets, small covers for machinery and equipment, etc.
(Used in combination with push latch, etc.)
●Range of use: Lids of a size and weight less than the damper torque
(See the Specifications table and Maximum Lid Torque Calculation)
●Operating temperature range: 0- 40°C
SPECIFICATIONS
Order code Part No.
170-028-293 HG-JHS9-S-BL
170-028-294 HG-JHS9-S-WT
170-028-295 HG-JHS9-U-BL
170-028-296 HG-JHS9-U-WT
PRECAUTIONS FOR USE
This product is for indoor use only. Do not use outside or anywhere where it will be exposed to water.
Do not use for an other purpose or with specifications other than those shown in this document.
Do not use excessive force with the damper as this may result in damage.
If the operating temperature increases, the door movement becomes quicker. If the temperature decreases, movement becomes slower. This is not a mechanical problem.
※
Side-mounted type
Component Parts
①Bracket...2 pcs
Ｒight: Damper installed.
Left: Install Spring assy.
Left Right
②Spring assy
assy...1pc
②Spring
③Side bracket
...L/R 1 each(marked L and R)
· Screws (to be supplied by the user)
Countersunk head screw M3
or Countersunk head wood screw 3.1
or Countersunk head tapping screw 3
Bind head screw M3
×8 pcs
or Pan head tapping screw 3.1
or Bind head tapping screw 3
Position of Lid Mounting Holes (Seen from rear)
W1＝Cabinet inner width measurement – 6
22
10
In this guide, "left" refers to the left side when looking at the cabinet from the front.
Colour
Black
White
Black
White
The possibility of injury or property damage only is assumed.
Front View
Countersunk hole
①
Damper
Left: Spring assy
（ ）
Rear View
4× 3.5 bore Counterbore
7.2 Depth 2
×4 pcs
22
Type Torque
Side-mounted
0.035±0.008N・m
Rear-mounted
Component Parts
①Bracket...2 pcs
（3）
Ｒight: Damper installed.
Left: Install Spring assy.
Left
②
2
②Spring assy
assy...1pc
②Spring
43
③Side bracket
22 10
...L/R 1 each(marked L and R)
· Screws (to be supplied by the user)
Bind head screw M3
or Pan head tapping screw 3.1
or Bind head tapping screw 3
Position of Lid Mounting Holes (Seen from rear)
8
10
Rear-mounted Type
Front View
Right
①
Rear View
4× 3.5 bore Counterbore
7.2 Depth 2
×12 pcs
W2＝Cabinet inner width measurement – 3
10
22
（1.5）
Meaning of symbols
Warning
Caution
Prohibited
Required
（1.5）
Damper
（Left spring assy）
②
43
8 3.5
22 10
8
22
10
（1.5）
1