1. Manuals
  2. Brands
  3. Lamp Manuals
  4. Door Opening System
  5. FD50-H
  6. User manual and assembly manual

Lamp FD50-H User Manual And Assembly Manual

Slidin door system
Hide thumbs Also See for FD50-H:

Advertisement

Table of Contents

FD50-H SLIDING DOOR SYSTEM Installation Manual
(Recessed Mount Type for Pocket Door, with Two-way Soft Close)
Thank you for using our product. Before installation, please read this manual thoroughly to ensure correct installation.
Please keep this manual at hand for future reference.
ABOUT THE PRODUCT
T his is a parts set for sliding door system for residential &
●    
commercial use.
● Built in soft closer enables two-way soft closing movement
in both direction.
Two sections of track for easy maintenance after installing.
● 
SPECIFICATIONS
Door height
Door width
Min. Door thickness
Max. Door weight
Vertical adjustment
Depth adjustment
・    T he closing speed of the soft closing type door may change
depending on the ambient temperature, operating method or
installation quality.
・    R ecommended ambient temperature range is 5 to 40
1
 When using a light weight door, you may feel the resistance of the
※
soft closer when opening the door.
FOR YOUR SAFETY AND CORRECT INSTALLATION
Meaning of symbols
Warning
Caution
Warning :
If not followed, death or serious injury may result.
This product should be installed by a qualified person in accordance with this manual. If it is not installed correctly, the door
may fall and cause injury.
Provide a frame that can withstand the weight and impact of opening and closing the door. Be sure to use the specified
screws and tighten them securely. If the mounting strength is insufficient, the door may fall and cause injury.
Do not use this product for any other purpose, or with doors that are outside the specifications of this manual.
Do not disassemble or modify any parts other than those described in this document.
Caution :
If not followed, injury or damage may result.
Follow the specified dimensions, specifications, and alignment of the door and frame. Warping, tilting or twisting of the
frame or door may cause failure.
If cutting any parts, make sure to remove any burrs before installation. Also check the upper track for any left-over burrs or
scraps and remove these.
This product is a part for architectural fittings. After installation, please check the function and safety of the final product.
Please inform the end user how to use the product safely.
Make sure to check the screws for slack at regular intervals (one month from first usage, half a year, and then one time
every year is recommended).
When installing the "pocket door", make an "easy-maintenance" structure.
For example, use a removable panel.
Install the product with two people (in the case of one person, there is a risk of damaging components).
Max. 2400 mm
2401 - 2700 mm
680 - 1500 mm
800 - 1500 mm
30 mm
1 
50
kg/door
※
3 mm upward, 4 mm downward
± 2 mm
Prohibited
Required
Part No.FD50DHCP-PD
Door pocket
Door
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FD50-H and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Lamp FD50-H

Summary of Contents for Lamp FD50-H

  • Page 1 FD50-H SLIDING DOOR SYSTEM Installation Manual (Recessed Mount Type for Pocket Door, with Two-way Soft Close) Part No.FD50DHCP-PD Thank you for using our product. Before installation, please read this manual thoroughly to ensure correct installation. Please keep this manual at hand for future reference.

  • Page 2: Component Parts

    COMPONENT PARTS ① ② ③ ④ ⑤ ⑥ ⑦ Soft closer Door guide Name Upper roller Front trigger Pocket trigger Floor guide Upper track (two way) track Order code 250-020-764 250-020-765 250-029-707 250-029-706 250-029-718 250-019-971 Part No. FD50-TRP FD50-WRH-DSC FD50-WRH FD50-TRGPF FD50-TRGPB-HB FD50-BGR18 FD30-HBRT1500SIL Parts...

  • Page 3: Tools Required For Installation

    TOOLS REQUIRED FOR INSTALLATION ・  D rill bit for metal: ϕ5 ・Philips head driver #2 ・  M achine or tool for cutting ・Drill bit for metal (for ϕ9.6 countersunk hole) aluminum ally INSTALLATION PROCEDURE Cutting and Hole Drilling on Upper Track Caution Caution  ...
  • Page 4 Preparation of Mounting Parts Casing Caution   When cutting, reinforce Main unit the track to prevent Casing deformation at the cut section. Lever ⑦ Countersunk head tapping screw 4 × 20 (not provided) Installing Pocket Trigger Insert this end with the pin.
  • Page 5 Mounting of Open Area Track Caution   【1 Connecting to door pocket track. Overlap the two countersunk holes on the pocket trigger and the two holes on the open area track. Align the track end to the end of Deviation of the joint position makes the door pocket track.
  • Page 6 Mounting of Floor Guide Temporarily Temporarily fasten through the Position floor guide just below the Caution   slotted holes with the provided center of the upper track. The position of the model where screws. the margin occurs is shown in the figure.
  • Page 7 Adjusting the Door Position Adjust the door so that it is parallel to the upper track with 6-13 mm of clearance between the door and floor. Caution   The adjustment of the door should be done Do not turn the adjustment screw beyond adjustment range. with the jump prevention nut loosened.
  • Page 8 Appendix 1 How to Remove Door, Track 【1】 How to remove door Soft closer Put a support of 10mm thickness under the door. Pull out the roller (main unit) from the casing, while pushing the lever on the roller. Remove door Pull out the door, while making sure not to let it scratch against the door pocket.
  • Page 9 Appendix 2 How to Shift the Connecting Position of the Tracks 【1】 When determining the trigger position on site Put a mark on the open area track with reference to the leading edge (1) Put a mark on the open area track with reference to the of the door.

  • Page 10: Troubleshooting

    SUGATSUNE AMERICA, INC          Tokyo, JAPAN Shanghai, CHINA California, USA Phone: +81 (0)3 3866 2260 E-mail:export@sugatsune.co.jp Phone: +86 21 3632 1858  E-mail:lamp@sugatsune.com.cn Phone: +1 310 329 6373 E-mail:sales@sugatsune.com SUGATSUNE KOGYO (UK) LTD Guangzhou, CHINA Chicago, USA          Reading, UK Phone: +86 20 6639 3552  E-mail:lamp@sugatsune.com.cn...

This manual is also suitable for:

Fd50dhcp-pd

Table of Contents