Lamp FD30-F Installation Manual

FD30-F FOLDING DOOR SYSTEM
Installation Manual
(Pivoted folding, Center hinge surface mount)
Thank you for selecting our product. Before starting installation, please read this manual thoroughly to ensure correct installation.
Please keep this manual at hand for future reference.
ABOUT THE PRODUCT
This product is a parts set for folding door system for indoor use.
●
Easy door installation and adjustment.
●
SPECIFICATION
Max .Door width
Max .Door height
Min .Door thickness
Max .Door weight
Height adjustable range
FOR YOUR SAFE WORK AND CORRECT INSTALLATION
Meaning of symbols
Warning
Prohibited
Caution
WARNING:
If not followed, death or serious injury may result.
This (sliding door system) should be installed by a qualified person. If the system is not installed correctly, the door will not
operate smoothly, and may cause injury.
It is necessary to manufacture the frame with sufficient strength so that it endures the weight of the door and any impact
upon opening/closing the door. Only use designated screws and ensure that they are fastened firmly. A frame with poor
strength or loose screws might result in the door falling and causing injury. Do not try to use this product for anything other
than its original purpose.
Do not use any part for applications outside of its specification.
Do not disassemble nor modify any parts other than those described in this document.
Caution:
If not followed, injury or damage may result.
This product is a part for architectural fittings. After installation, make sure to test the finished product thoroughly to ensure
that it is well-functioning and safe. Please inform the end user about general precautions and safety to prevent improper use.
Make sure to follow the designated dimensions, specifications, and horizontal/vertical angles. Make sure that the frame is
not warped, since it may affect the movement of the door.
If cutting any parts, make sure to remove any burrs before installation. Also check the upper track for any left-over burrs or
scraps and remove these.
Do not open / close the door with excessive force as this may result in damage.
Make sure to check the screws for slack at regular intervals (one month from first usage, half a year, and then one time
every year is recommended).
450 mm
2400 mm
28 mm
15 kg / door
± 3mm
Required
Part No.FD30FAP
1