Lamp AZ-AT230-HL Nstallation Instructions

TOUCHLESS MULTI-PURPOSE LID AZ-AT
Installation instructions
Thank you for using our product. Before installation, please read this manual
thoroughly to ensure correct installation.
Please keep this manual at hand for future reference.
A B O U T T HE P ROD U CT
●The lid opens automatically when the sensor detects a presence.
●The sensing distance of the sensor can be adjusted from 0 to 300 mm by
adjusting the knob on the back.
F O R YO UR S AF E TY AN D C OR R EC T I NS TAL L AT ION
Meaning of symbols
Warning
Prohibited
Caution
Caution:
If not followed, injury or damage may result.
This product is designed to function when installed vertically as shown below. Horizontal, slanted or upside down installation will result in improper
function and may lead to injury.
To avoid any risk of accidental injury, ensure that the product is securely fastened to a support with adequate strength.
Do not use this product for any purpose that is outside of the specifications of this manual.
Do not use outside or anywhere it will be exposed to water. It may cause failure.
Do not use in places where strong radio waves are generated. It may cause malfunction.
Ambient temperature range is 0 to 40ﾟC
The closing speed of the lid may vary according to ambient temperature. If the product is stored below zero degrees allow it to reach room
temperature before use.
Due to the characteristics of the sensor, the sensing distance varies depending on the object.

PARTS DESCRIPTION

Description
Quantity
Flap lid body
Sticker (warning)
Sticker (Open)
Wiring clips
Cover cap
Screw jig

DIMENSION DRAWING

Item No A B W H
AZ-AT230-HL 234 160 319 266.5
AZ-AT310-HL 310 220 395 340
when flap at 90° (D)
Auto-opening
angle: 80ﾟ
100
Required
1
1
1
3
4
1
C P D
49 95 184.7
64 140 244.7
4× 3.5holes
for fixing screws
10
Sensing range
Front
Side

TOOLS NEEDED FOR INSTALLATION

●AC Adaptor (sold separately)
Screws (not provided)
●
Choose the suitable length according to the material to be mounted.
Recommended screw : Tapping screw Nominal 3 ・・・・ ・4 pcs

CUTOUT DIMENSIONS

AZ-AT310-HL
Mounting
screw holes
W
A
AZ-AT230-HL
Mounting
screw holes
45°
0°
200
300
200
45°
25°
15°
300
382.4
+1
0
4×R6 Max.
Cut out: Backside view
4×R6 Max.
147.5
132.5 153.2
+0.5 +0.5
0 0
Cut out: Backside view
1