Putting The Vmx 200 Into Operation; Charging The Headset Battery - Sennheiser VMX 200 Instruction Manual

Putting the VMX 200 into operation

2 h
Putting the VMX 200 into operation

Charging the headset battery

WARNING
Danger of injury!
Wearing the headset when charging can cause burns and injuries.
Do not wear the headset when charging.
Before using the headset for the first time, charge the rechargeable
battery for at least 2.5 hours. Later, 2 hours will suffice to fully charge the
battery. A fully charged battery provides a talk time of approx 6 hours.
1 Take off the headset and switch it off (see page 14).
2 Connect the smaller plug of the charging cable to the USB socket of the
VMX 200.
3 Connect the USB plug of the charging cable to the USB socket of the
power supply unit or your computer.
4 The battery is being charged and all active connections are interrupted.
The LED lights up red. When charging is complete, the LED flashes blue
once every 5 seconds.
1
3
EU
UK
US
AU
When the battery level drops below 10 minutes of talk time, the LED
flashes red and you hear a low battery warning every 20 seconds.
The headset automatically switches off after the battery has
dropped below the minimum level.
2
3 s
4
100 %
VMX 200 | 9