Connecting The Mains Unit - Sennheiser SR 300 IEM Instruction Manual

Connecting the mains unit

Only use the supplied mains unit. It is designed for the transmitter and ensures safe
operation.
Insert the yellow connector of the NT 2-3 mains unit into the yellow socket
transmitter.
Pass the cable of the mains unit through the cable grip
Slide the supplied country adapter
Plug the mains unit into a wall socket.
The STANDBY button
The AC 3 antenna combiner incorporates DC distribution to enable simultaneous
powering of up to four transmitters via its BNC sockets. These transmitters do not
require their individual power supply (see also page 12).
Putting the transmitter into operation
onto the mains unit
is backlit in red.
of the
.
.
13