Power and audio cabling
For the product overview of the ConnectStation also see
"ConnectStation hardware overview".
Connecting/Disconnecting the ConnectStation to/from the mains power
supply
To connect the ConnectStation to the mains power supply:
▷
Connect the IEC connector of the supplied mains cable to the mains so-
cket.
▷
Connect the mains plug of the mains cable to a suitable electrical so-
cket.
To disconnect the ConnectStation from the mains power supply:
▷
Switch the ConnectStation off.
▷
Pull the mains plug of the mains cable out of the electrical socket.
Switching the ConnectStation on/off
To switch the ConnectStation on:
Briefly press the mains power switch on the front panel of the
▷
ConnectStation.
►
< 1s
on
Status LEDs:
system running
boot up
The ConnectStation boots up. The mains power switch lights up blue
and the status LEDs indicate when the system is running.
To switch the Connectstation off:
▷
Briefly press the mains power switch on the front panel of the
ConnectStation.
►
< 1s
off
Status LEDs:
system off
shut down
The ConnectStation shuts down. The blue light of the mains power
switch goes off and the status LEDs indicate when the system is swit-
ched off.
Installation
38