Sennheiser SR 300 IEM Instruction Manual page 27

Selecting mono or stereo operation – "Mode"
Menu
Sensitivity
PEAK PEAK
0 0
Mode
-10 -10
-20 -20
Easy Setup
-30 -30
Frequency Preset
-40 -40
AF AF
Name
Call up "Mode"
Equalizer
Auto Lock
Advanced
Exit
Select "Stereo" if you want to transmit the audio signals from the left and right audio
input
Select "Mono" if you only want to transmit the audio signal from the left audio input
BAL AF IN L (I)
Starting synchronization – "Easy Setup"
Menu
Sensitivity
PEAK PEAK
0 0
Mode
-10 -10
-20 -20
Easy Setup
-30 -30
Frequency Preset
-40 -40
AF AF
Name
Call up "Easy Setup"
Equalizer
AutoLock
Advanced
Exit
Call up
receiver to the transmitter via the infra-red interface (see page 16).
The RF signal of the transmitter is automatically deactivated
transmitter awaits the data transfer.
If you do not want to start the transfer or to chancel the transfer:
Menu
Sensitivity
Mode
Easy Setup
Stereo
(BAL AF IN L (I) and BAL AF IN R (II)
.
During mono operation, you have to deactivate the pilot tone evaluation on your
EK 300 IEM G3 receiver in order to ensure that the receiver outputs the same signal
on channel I and II.
Menu
Mode
Easy Setup
Frequency Preset
"Easy Setup" to transfer an unused frequency preset from the EK 300 IEM G3
Press the STANDBY button.
For a detailed description of the
"Synchronizing transmitters and receivers via the infra-red interface" on page 16.
Adjusting settings via the operating menu
PEAK PEAK Mode
0 0
-10 -10
Stereo
-20 -20
-30 -30
-40 -40
AF AF
Select the desired
setting
"Stored"
).
PEAK PEAK Easy Setup
0 0
-10 -10
RF Mute
-20 -20
-30 -30
-40 -40
AF AF
RF signal is deactivated
Easy Setup function, refer to the chapter
PEAK Mode
0
-10
Mono
-20 – 18 dB
-30
-40
AF
Store the setting
PEAK PEAK Easy Setup
0 0
-10 -10
sync
– 18 dB
-20 -20
-30 -30
-40 -40
AF AF
Infra-red transmission
is awaited
("RF Mute" flashes) and the
25