Deactivating The Lock Mode Temporarily - Sennheiser SR 300 IEM Instruction Manual

To switch the transmitter on and to
Keep the STANDBY button
panel.
Press the jog dial.
The transmission frequency is displayed but the transmitter does not transmit
an RF signal. The transmission icon
backlighting changes from orange to red and
with the standard display.
Use this function to prepare a transmitter for use during live operation without
causing interference to existing transmission links.
To activate the RF signal:
Briefly press the STANDBY button
"RF Mute Off?" appears on the display panel.
Press the jog dial.
The transmission icon

Deactivating the lock mode temporarily

You can activate or deactivate the automatic lock mode via the
lock mode is activated, you have to temporarily deactivate it In order to be able to operate
the transmitter:
Press the jog dial.
"Locked" appears on the display panel.
Turn the jog dial.
"Unlock?" appears on the display panel.
Press the jog dial.
The lock mode is temporarily deactivated:
When you are in the operating menu
The lock mode remains deactivated until you exit the operating menu.
When the standard display is shown
The lock mode is automatically activated after 10 seconds.
The lock mode icon flashes prior to the lock mode being activated again.
B.Ch: 20.24
ew300IEM
531.375 MHz
EQ
Standard -18dB
deactivate the RF signal on switch-on
pressed until "RF Mute
is not displayed. In addition, the display
"RF
.
is displayed again.
Using the transmitter
(offline operation):
On?" appears on the display
Mute" flashes in alternation
"Auto Lock" menu item. If the
15