Doing A Frequency Check; The Automatic Lock Mode (Autolock Function) - Sennheiser SKM 5200-II - ANNEXE 696 Instruction Manual

Using the radio microphone

Doing a frequency check

The radio microphone has a frequency check mode that prevents that the
radio microphone transmits on an unwanted frequency after switch-on.
If the displayed frequency is the wanted frequency:
MHz
If you want to select another frequency, proceed as follows:
Release the ON/OFF
Within 5 seconds, change to the setting mode of the "CHAN" or
"TUNE" menu.
Change the transmission frequency (see "Adjustment tips for the
operating menu" on page 23).

The automatic lock mode (autolock function)

The radio microphone has a lock mode that prevents that the radio
microphone is accidentally programmed while operating. When the
autolock function is activated via the "LOCK" menu (see page 27) the lock
mode is automatically activated 10 seconds after pressing the last button
and remains activated.
CH dB MHz
You can deactivate the autolock function either permanently (see
page 27) or temporarily (see page 15).
14
When switching on the device, keep the
ON/OFF
The RF signal is deactivated. The current
frequency is displayed on the LC display
panel
Release the
RF
After five seconds the "RF"
appears and the radio microphone starts
transmitting.
button .
Prior to this, the lock mode icon
several times on the display.
AF
button depressed.
.
ON/OFF button .
icon
flashes