Identifying The Radio Microphone - Sennheiser SKM 5200-II - ANNEXE 696 Instruction Manual

Deactivating the autolock function temporarily
To be able to make changes to the settings via the operating menu, you
must temporarily deactivate the lock mode.
UP
SET
DOWN
After you have exited the operating menu, the lock mode is automatically
re-activated after 10 seconds. You can also immediately activate the lock
mode by pressing the

Identifying the radio microphone

The radio microphone comes with nine interchangeable color-coded
identification markers, allowing you to clearly identify each radio
microphone.
To achieve this, either press the
button
(switch position
"LOCK" appears on the display panel.
Slide the multi-function switch
position
"UNLOCK" appears on the display panel.
Press the multi-function switch
position
You can now change the settings.
ON/OFF button
To remove the identification marker, press
the two snap-in pins together while
sliding the identification marker out of the
guide rails.
Put on the new identification marker by
sliding it onto the guide rails.
Using the radio microphone
or the multi-function switch
SET).
(UP) or (DOWN).
SET).
briefly.
ON/OFF
to the
(switch
15