Setting The Frequency Group (Auto Group Setup); Selecting Frequencies From The Preset Screen; Setting Frequencies From The Mhz Screen - Sennheiser evolution e 845 Instruction Manual
Stage microphones
Hide thumbs
Also See for evolution e 845:
- Instruction manual (11 pages) ,
- Instruction manual (8 pages) ,
- Quick manual (2 pages)
Table of Contents
Advertisement
3.8.1 Selecting Frequency
Groups (Auto Group Setup)
Diagram 3: Automatic search for a
clean (interference-free) Frequency
3.8.2 Selecting Frequencies
from the Preset Screen
Diagram 4: Selecting frequencies
3.8.3 Setting Frequencies from
Diagram 4a: Setting frequencies
24
Downloaded from
www.Manualslib.com
3 Setting Up
SAVE >Y<
>FREQ<
>PRG IR<
IR
3.9.1
Group.
"AT 3.0 02"
FREQ
>NAME<
">AT<"
>GROUP<
">3.0<"
>CHANNEL<
">01<"
SAVE >Y<
>FREQ<
>PRG IR<
IR
3.9.1
manually.
The MHz screen allows you to set the frequency directly in 25 kHz increments.
the MHz Screen
"750.000"
FREQ
MHz
3 sec.
">750.000<"
MHz
">750.025<"
MHz
SAVE >Y<
>FREQ<
>PRG IR<
IR
3.9.1
directly.
manuals search engine
AUTO
GROUP
No CH
>1<
>NAME<
">AT<"
>NAME<
>SCAN<
">AT3.001<"
>NAME<
FREQ
">AT<"
SAVE >N<
>RETRY<
>EXIT<
>FREQ<
AUTO GROUP
"750.000"
FREQ
SAVE >N<
>FREQ<
Preset
SAVE >N<
>FREQ<
"750.000"
FREQ
Use
and
to select the number of
required channels between "1" (mini-
mum) for a single-channel system and
"12" (maximum) for a 12-channel system.
Use
and
to select the desired
Preset. The Preset name is identical to
its country ID code. Selectable Presets
include only those supporting the
selected number of channels.
The receiver will automatically find a
Group with the selected number of
clean frequencies within the selected
Preset and tune to the first clean fre-
quency.
If the receiver finds no clean frequency,
the display will revert to the previous
Preset name.
>RETRY<: start a new search.
SAVE >Y<: save your setting.
SAVE >N<: reject your setting.
Clean frequencies are frequencies
where the receiver finds no RF signal or
an RF signal whose level is lower than
the current threshold setting.
MHz
Use
and
to select the desired
Preset.
Use
and
to select the desired
Frequency Group.
Use
and
to select the desired fre-
quency as a Subchannel of the selected
Frequency Group.
SAVE >Y<: save your setting.
SAVE >N<: reject your setting.
To call up the MHz screen, press and
hold the two arrow keys simultaneously
for three seconds.
Press
to increase the frequency by
25 kHz or
to decrease the frequency
by 25 kHz.
SAVE >Y<: save your setting.
SAVE >N<: reject your setting.
MHz
AKG WMS 450 V 1.10
Advertisement
Table of Contents
