Sennheiser SKM 5200-II - ANNEXE 696 Instruction Manual page 25

Adjustment tips for the operating menu
When you have selected the channel bank "FIX" and then select the
"TUNE" menu, the radio microphone automatically switches to
channel 01 of the channel bank "VAR" and "VAR" briefly appears on
the display panel
The transmission frequencies are tunable in 5-kHz steps within a switching
bandwidth of 184 MHz max.
When operating a multi-channel system, make sure to only use
intermodulation-free frequencies.
There are two options for setting the frequencies:
• You can set a new frequency for the selected channel:
UP
SET
DOWN
CH
CH MHz
MHz
• You can change to a different channel and set a new frequency for the
new channel:
UP
SET
DOWN
CH
CH
CH
24
.
In the selection mode of the "TUNE" menu,
press the multi-function switch
position
appears on the display and then the
currently assigned frequency is displayed.
Change the frequency by sliding the multi-
function switch
(DOWN).
Store your setting.
Press the multi-function switch for a longer
time (switch position
channel flashes on the display.
Select a new channel by sliding the multi-
function switch
(DOWN).
Confirm your selection by pressing the multi-
function switch
RF
SET). The current channel number
to the position
SET). The current
to the position
(switch position
(switch
(UP) or
(UP) or
SET).