Sennheiser SDC 8000 System Manual page 26

Operating the components of the SDC 8000 system
26
Press the MICRO key
Pressing the MICRO key on your console will automatically turn off the
microphone of the previous speaker ("first-in-first-out" principle). The
red signal light ring
console light up permanently, indicating that you can now take the
floor.
Note!
One delegate unit and the chairman unit can be simultaneously active.
3. In "Group 1" mode:
In this mode, the speaker limit is 1.
Press the MICRO key
If no other participant is currently speaking, you can take the floor
immediately. The red signal light ring
LED on your console light up permanently, indicating that you can
now take the floor.
If the speaker limit has been reached, you will join the waiting list and
the green "Request to speak" LED
soon as the active microphone is turned off, the microphone of the first
participant from the request-to-speak list is turned on, and so on.
When it is your turn to speak, the red signal light ring
"Microphone active" LED
4. In "Group 2" mode:
In this mode, the speaker limit is 2.
Press the MICRO key
If the speaker limit has not yet been reached, you can take the floor
immediately. The red signal light ring
LED on your console light up permanently, indicating that you can
now take the floor.
If the speaker limit has been reached, you will join the waiting list and
the green "Request to speak" LED
soon as one of the active microphones is turned off, the microphone of
the first participant from the request-to-speak list is turned on, and so
on.
When it is your turn to speak, the red signal light ring
"Microphone active" LED
5. In "Group 3" mode:
In this mode, the speaker limit is 3.
.
and the "Microphone active" LED
.
and the "Microphone active"
on your console starts flashing. As
on your console light up permanently.
.
and the "Microphone active"
on your console starts flashing. As
on your console light up permanently.
on your
and the
and the