Table of Contents
Advertisement
Operating the components of the SDC 8000 system
>Lautstaerke =
P1 P2 P3 P4 P5 P6
36
The interpreters can individually adjust both the volume of their
consoles' built-in loudspeakers and the volume of the connected
headphones.
The F1, F2 and F3 menu keys
The F1 and F3 menu keys serve to lock the central unit. The F2 menu key
has no function with the current unit.
To lock the central unit:
Make sure that the start display appears as shown on the left. If the
start display does not appear, press the EXIT key repeatedly until the
start display appears.
Simultaneously press the F1 and F2 menu keys
pressed for three seconds.
The "key" symbol (
display. The operating menu of the central unit is locked and you
cannot change the settings of your conference.
To unlock the central unit:
Simultaneously press the F1 and F2 menu keys
pressed for three seconds.
The "key" symbol (
display. The operating menu of the central unit can be accessed at any
time by pressing the ENTER key (see "Working with the central unit's
operating menu" on page 37), and you can change all settings of your
conference.
The menu operating controls
The jog wheel
and the ENTER
allow you to navigate through the central unit's operating menu, to choose
settings and to enter and change values.
Operating control Menu level
main menu
Jog wheel
submenu
main menu
ENTER key
and
submenu
main menu
EXIT key
and
submenu
For a complete overview of all menus of the central unit, see "Introduction
to the central unit's operating menu" on page 54 to 75.
) appears in the lower right corner of the
) disappears from the lower right corner of the
and EXIT
keys on the central unit
To
choose a menu item
choose a menu item
or
choose the desired setting
activate a selected menu item
or
save settings and return to the
previous menu level
exit a menu item without saving the
settings and return to the previous
menu level
and keeps them
and keeps them
Hide quick links:
Advertisement
Table of Contents
