Starting A Voting Session; Assigning A Participant The "Speaking Right - Sennheiser SDC 8000 System Manual

Mic N.: 0001
START VOTE
1 of 3 1 of 5
Mic N.: 0001
VOTE 1/3
000 000 000
YES ABS NO
Mic N.: 0001
VOTE 1/5 PRIOR=STOP
000 000 000 000
1 2 3 4
Mic N.: 0001
VOTE 1/3
245 002 150
YES ABS NO
Mic N.: 0001
RESULTS PRIOR=END
032 041 009 015
1 2 3 4

Starting a voting session

A voting session can be started by either the chairman or – provided that
a PC with software control is connected to the central unit – the conference
manager.
With the SDC 8000 CV chairman unit with voting function, you can start a
voting session as follows:
Choose one of the two voting modes "1 of 3" or "1 of 5" by pressing
the corresponding key below the display.
Depending on the voting mode chosen, your display looks like one of
the two displays shown on the left.
STOP
000
5
Ask the participants to cast their vote.
Cast your own vote by pressing one of the keys
or "ABS" (mode "1 of 3") or below "1" to "5" (mode "1 of 5").
Make sure that all conference participants have cast their vote.
To stop the voting session:
Stop "Vote 1/3" by pressing the key below "STOP".
The voting result is shown on the displays of the consoles.
Press the key below "END" to clear the voting result from the
STOP displays.
Stop "Vote 1/5" by pressing the PRIOR. key.
The voting result is shown on the displays of the consoles.
625 Press the PRIOR. key again to clear the voting result from the
5
displays.

Assigning a participant the "speaking right"

If – in "With Request" or
the MICRO key on his console, he makes a request to speak. All participants
who have made a request to speak will join a request-to-speak list.
To assign the first participant from the request-to-speak list the "speaking
right" using the SDC 8000 C or SDC 8000 CC chairman unit:
Operating the components of the SDC 8000 system
"With Req. No Clear" mode – a participant presses
below "YES", "NO"
31