Table of Contents
Advertisement
Options
3 Mode between Booth
Mode between Booths
Mode = Override
Press ENTER to Save
Options
4 Mode in Booths
Mode in Booths
Mode = Mixed
Press ENTER to Save
language. You then have to configure your system so that it comprises
three interpreter booth with two interpreter consoles each.
Configuring the operating mode between booths
To determine whether or not interpreter consoles installed in different
booths but configured to the same target language can be simultaneously
active:
From the central unit's operating menu, choose "
Options
Mode between Booth
"
" and "
The current mode in shown on the display.
Choose the desired mode.
You can choose between the modes "
Toggle Override
"
Mixed
Choose "
" if interpreters in different booths interpret into the
same target language and work in turns.
When two interpreters simultaneously interpret into the same
language, the red signal light ring
LED
on their consoles light up.
Override
Choose "
booth turns off the currently active interpreter console. The
interpreter console that was just turned off can only be turned on
again if the interpreter console by which it was turned off is
deactivated.
Toggle Override
Choose "
another booth turns off the currently active interpreter console. The
interpreter console that was just turned off can be turned on again
any time by pressing the MICRO key
Press the ENTER key to save your setting.
Configuring the operating mode within a booth
To determine whether or not the interpreter consoles installed within a
booth can be simultaneously active:
From the central unit's operating menu, choose "
Options
Mode in Booths
"
" and "
The current mode in shown on the display.
Choose the desired mode.
You can choose between the modes "
Mixed
Choose "
" if several interpreters in the same booth interpret
into the same language. When two interpreters simultaneously
interpret into the same language, the red signal light ring
"Microphone active" LED
Override
Choose "
a booth turns off the currently active interpreter console. The
interpreter console that was just turned off can only be turned on
again, if the interpreter console by which it was turned off is
deactivated.
Configuring the SDC 8000 system
" one after the other.
Mixed
".
and the "Microphone active"
" if activating an interpreter console in another
" if activating an interpreter console in
.
" one after the other.
Mixed
" and "
on their consoles light up.
" if activating another interpreter console within
Interpretation
",
Override
", "
" and
Interpretation
",
Override
".
and the
87
Hide quick links:
Advertisement
Table of Contents
