Table of Contents
Advertisement
System diagnosis
1
2
3
4
5
6
7
Language
7
XLR-out/in
7.2
DU-Number
Communication
8
Address of DU unit last activated (MIC key): 24
9
10
11
12
13
14
15
16
It is, however, possible that the number of connected delegate units does
not agree with the number of delegate units indicated on the display.
Example:
You have a cable string with 25 delegate units but only 15 delgate units
are indicated on the display. Possible causes:
The 16th delegate unit does not receive any data because it is defective.
Replace the 16th delegate unit.
The system cable between the 15th and the 16th delegat unit is
defective. Replace the system cable.
The 15th delegate unit is defective. This unit does contain data but
cannot send the data. Replace the 15th delegate unit.
Displaying the address of the delegate unit
By choosing this menu item, the delegate unit which was last activated via
the
To choose menu item 7.2 of the central unit's operating menu, proceed as
follows:
Conference
Voting
[
]
Save
Load
SYSTEM
[
]
DU-ADDRESS
MIC
key is displayed.
With the
/
buttons, choose the main menu item [SYSTEM].
Press the
SET
button to activate this menu item.
/
With the
buttons, choose the submenu item [DU-ADDRESS].
Press the
SET
button to activate this menu item. The address of the
delegate unit which was last activated via the
Address of DU unit
last activated (MIC key): 24
Number of the DU unit, on which the
MIC key was last pressed.
The indicated number corresponds to the assigned microphone address
(see "Assigning microphones to the conference console icons" on
page 102).
MIC
Press the
key of another delegate unit in a string. The display is
updated and another DU address is displayed. If the display is not
updated, the delegate unit last activated is defective.
MIC
key is indicated.
118
Hide quick links:
Advertisement
Table of Contents
