Table of Content 1. Introduction................................2 2. Appearance................................. 3 3. Main Features................................4 4.Set up Instruction.................................4 4.1 Power on and Turn on / off..........................4 4.2 Join Into Lora Network............................ 4 4.3 Function Key..............................5 4.4 Data Report...............................5 5. Restore to Factory Setting............................5 6.
LoRaWAN protocol. When the door and window are abnormally opened or the door and window glass is broken, the R311CB will send a message to the gateway which is installed on the door or window with two glass sliding sashes - the reed switch and...
The network operation is as following: (1) If R311CB had never joined any network or at factory setting mode, turn on the device; it will search an available LoRa network to join. The green indicator will stay on for 5 seconds to show it joins into the network, otherwise, the green indicator does not work.
Max Interval 5. Restore to Factory Setting R311CB saves data including network key information, configuration information, etc. To restore to factory setting, users need to execute below operations. 1. Press and hold both function key for 5 seconds till the green indicator flashes and then release;...
(B) When it is not in the network → R311CB will enter sleeping mode and wake up every 15 seconds to search a network to join in the first two minutes. After two minutes, it will wake up every 15 minutes to request to join the network.
9. Important Maintenance Instruction Your device is a product of superior design and craftsmanship and should be used with care. The following suggestions will help you use the warranty service effectively. • Keep the equipment dry. Rain, moisture, and various liquids or moisture may contain minerals that can corrode electronic circuits.