AEG PROCOMBI PLUS BS836680K User Manual page 32

32 www.aeg.com
3. Put the plug of the core temperature
sensor into the socket at the front of
the appliance.
The display shows the core temperature
sensor symbol
4. Set the core temperature.
5. Set the heating function and, if
necessary, the oven temperature.
To change the core temperature,
touch the temperature on the
display.
A B
Menu
1h 14m
64°
G
A. Return to menu
B. How long the function is active
C. Current set heating function
D. Current set temperature
E. Current temperature in the oven
F. Stop
G. Current set temperature for the
core temperature sensor
When the meat is at the set core
temperature, an acoustic signal sounds.
The appliance deactivates automatically.
6. Touch a sensor field to stop the
signal.
7. Remove the core temperature sensor
plug from the socket and remove the
meat from the oven.
.
C D E
220°
100°
Stop
F
WARNING!
The core temperature sensor
is hot. There is a risk of
burns. Be careful when you
remove the tip and the plug
of the core temperature
sensor.
9.2 Inserting the accessories
Wire shelf:
Push the shelf between the guide bars of
the shelf support and make sure that the
feet point down.
Deep pan:
Push the deep pan between the guide
bars of the shelf support.
Wire shelf and the deep pan together:
Push the deep pan between the guide
bars of the shelf support and the wire
shelf on the guide bars above.