Vertiv™ Avocent® IPUHD 4K IP KVM Device Installer/User Guide
By default, the FIPS mode of operation is disabled and needs to be enabled to modify or update.
To enable or disable FIPS mode:
1.
From the Configuration - System Settings screen, under the FIPS Mode Settings, use the slider to enable or
disable FIPS mode.
2. Click Apply.
3. Perform a system reboot for the changes to take effect.
NOTE: The selected FIPS mode is enabled even after performing a factory reset.
Remote presence settings
From the Configuration - System Settings - Remote Presence Settings screen, the following options are provided:
•
Enable an automatic lock for the host OS.
NOTE: This option is not applicable to the macOS.
•
Enable a Keep Awake feature for the host OS.
2.4.9 Certificate
From the Configuration - Certificate screen, the following options are provided:
•
View the general information for the currently uploaded certificate.
•
Generate a Certificate Signing Request (CSR).
•
Upload a certificate file.
To generate a CSR:
1.
From the left-hand sidebar, click Configuration - Certificate - Generate CSR.
2. Enter the following required information: Common Name, State, Organization, Email, Country, City, and
Organizational Unit.
3. Click Generate.
To upload a certificate:
1.
From the left-hand sidebar, click Configuration - Certificate - Upload Certificate.
2. Click the Upload PEM button.
3. Browse to and select the appropriate file.
NOTE: Uploading a new certificate replaces the current certificate and requires you to login to the appliance again.
2.5 Firmware
2.5.1 Firmware management
To reboot the main adapter:
NOTE: This action changes the currently running firmware. By default, currently running firmware is primary firmware.
1.
From the left-hand sidebar, click Firmware - Firmware Management.
2. Click on the drop-down arrow next to Reset Action and select GracefulRestart.
3. Click OK. The device reboots immediately.
18
Proprietary and Confidential ©2024 Vertiv Group Corp.
2 Web User Interface (UI)
Need help?
Do you have a question about the Avocent IPUHD 4K IP KVM Device and is the answer not in the manual?