User Management - Vertiv Avocent IPUHD 4K IP KVM Device Installer/User Manual

Figure 2.3 Serial Interfaces Overview
To configure the serial interfaces:
1. From the left-hand sidebar, click Configuration - Serial Interfaces.
2. Ensure that the Interface Enabled option is enabled.
NOTE: Serial sessions cannot launch if this option is disabled.
NOTE: If the SSH Enabled option is enabled, you will be connected to the serial port that is configured as per SSH port
through the SSH client.
3. Use the drop-down menu to select the appropriate values for these fields:
• Bit Rate
• Stop Bits
• Flow Control
• Data Bits
• Parity
4. Enter the name in the Display Name field. You can give the name of the port to which it is connected. For
example, to IPSL RJ45 port 2.
5. Click Apply. When finished, the serial interface entries appear on the Dashboard screen where you can launch
sessions.
NOTE: To set the default values, use the refresh icon in the upper right-hand corner.

2.4.4 User management

Administrators can restrict port access through the permissions assigned to custom user groups. The default user for the
Avocent IPUHD 4K IP KVM device is an administrator. The three pre-defined user groups are as follows:
• Administrator
• Operator
• Read only
2 Web User Interface (UI) Proprietary and Confidential ©2024 Vertiv Group Corp.
Vertiv™ Avocent® IPUHD 4K IP KVM Device Installer/User Guide
15