Aiper Scuba N1 Faq

Aiper Scuba N1
Frequently Asked Questions (FAQ)
Q: Which pool types & structures is this device suitable for? Which are not
suitable for this device?
A: The device performs as intended in pools made of concrete, fiberglass,
vinyl, mosaic tiles, glass, and other materials; it cannot be used for
infinity pools.
Q: Can the device clean steps?
A: The device can climb steps, but it cannot clean them.
Q: Why does the device automatically shut down after being turned on?
A: After the device is turned on for 30 s, it will turn the water pump briefly
every 10 s to check whether it has entered the water for 3 times. If it de-
tects that it has not entered the water 3 times, it will shut down; please put
the device into the pool within 1 min after starting the device. The device
will begin cleaning within 10 s after it reaches the bottom of the pool.
Q: Why does the device stay on my pool drain for a long time?
A: The suction of your pool drain may pull your device onto it, preventing
the device from continuing its cleaning operations. Do not, under any
circumstances, open the drain outlet while your device is cleaning the
pool. If the device has become stuck, it will adjust its propulsion and
work free within 3 minutes.
Q: How do I use Eco mode?
A:
1) After turning on the device, short press the button to select Eco Mode
and put the device into the water. The device will clean the bottom of the
pool every 48h for one week for a duration of 45 minutes per cleaning.
2) The device may be left in the pool during the entire process and does
not need to be retrieved until the three cleaning cycles over one-week
are completed.
3) If the device is removed from the pool during the device's sleep
period (within 48h of inactivity) and the button is pressed to wake up
the device, the device will exit Eco Mode.
EN