Related Manuals for EnerSys NexSys TPPL
Summary of Contents for EnerSys NexSys TPPL
- Page 1 NEXSYS TPPL BATTERY ® Equipped with Accelerated Throughput Package (ATP) OWNER’S MANUAL www.enersys.com...
-
Page 2: Table Of Contents
CONTENTS Introduction ........3 Intended Use ........4 Battery Architecture ......4 Operator Interfaces ......5 Safety ..........6 Operational Data and Limits ... 7 Handling ..........7 Installation into Industrial Truck ..8 Operation .......... 8 Charging Battery ......9 Service and Maintenance .... -
Page 3: Introduction
Proper instruction and training of all users must be ensured prior to any contact with the battery system. For service, contact your sales representative or call: EnerSys EMEA EnerSys World Headquarters EH Europe GmbH 2366 Bernville Road Baarerstrasse 18... -
Page 4: Intended Use
NexSys TPPL batteries with ATP are designed for (EN 1175 and EN 60204-1 for CE and UKCA ® industrial truck applications only. Only EnerSys certification). Truck harness compliance with ® approved chargers are to be used with NexSys relevant standards shall be confirmed by the truck ®... -
Page 5: Operator Interfaces
The NexSys TPPL battery can be integrated into ® an OEM industrial truck CAN bus system which allows full integration of the battery. Please contact your local EnerSys service ® representative for this option. This requires engineering consultation between EnerSys and the ®... -
Page 6: Safety
• Only handle and store the battery in a dry charger. environment. • Only charge this battery with EnerSys -approved ® • Store only in monitored areas with suitable fire chargers for NexSys TPPL batteries. -
Page 7: Operational Data And Limits
• If any material, such as liquid electrolyte, from the allowable limits as stated in this document, a damaged battery comes into contact with the immediately cease and do not resume operation, and contact your EnerSys service mouth or is swallowed, rinse out the mouth ®... -
Page 8: Installation Into Industrial Truck
• Upon receipt of the battery, it must be checked recommendation. for any visible signs of damage to the battery • Only use EnerSys -approved fasteners, ® and all cables, plugs, and accessories. connectors, cabling, and plugs with this battery. -
Page 9: Charging Battery
Respect all visual and audible warnings from the the truck. user interface devices. Charging Battery This battery must only be charged by cable is connected. The optimal charge current EnerSys -approved chargers for NexSys TPPL will automatically be determined based on the ® ®... -
Page 10: Service And Maintenance
• Do not clean the battery with pressurised water. show signs of serious wear, they need to be replaced. Please contact your EnerSys service representative ® for all repairs and replacements. All repairs must be done by an authorised EnerSys technician trained ® on NexSys TPPL products. ®... -
Page 11: Storage
STORAGE & SHIPPING Storage Refer to GLOB NexSys TPPL Battery Owner’s Manual (GLOB-EN-OM-NEX-TPPL 1023). Shipping NexSys TPPL Batteries ® NexSys TPPL batteries are classified as ® “non-spillable wet electric storage batteries” and may be shipped by air or ground transportation without restriction. - Page 12 © 2024 EnerSys. All rights reserved. Unauthorised distribution prohibited. Trademarks and logos are the property of EnerSys and its affiliates except UL, CE, Android, and iOS, which are not the property of EnerSys. Subject to revisions without prior notice. E.&O.E.
Need help?
Do you have a question about the NexSys TPPL and is the answer not in the manual?
Questions and answers