Check Point QUANTUM SPARK 1900 Getting Started Manual page 44

Key Item
3 DMZ ports
4 LAN ports
5 SD card slot
6 WAN ports
7 USB3.0
8 Factory
Default
9 Service tag
10 Side
brackets
Description
The DMZ is a combo port of SFP and RJ45 (on the right).
Only one can operate at a time after a cable is connected.
The RJ45 port supports 10 / 100 MbE and 1 GbE.
The SFP port supports only 10 GbE.
Note - For information about supported SFP transceivers, see
sk92755.
n 4a - LAN ports 1-18 - support 10/100/1000 MbE.
n 4b - LAN 1 and LAN 2 (Sync in a cluster) - support 2.5 GbE.
n 4c - LAN SFP X1- 4 - support 10 GbE
Insert micro-SD card here.
The WAN port is a combo port of SFP and RJ45 (on the right).
Only one can operate a time once plugged in and connected.
The RJ45 port supports 10 / 100 MbE and 1 GbE.
The SFP port supports only 1 GbE.
Note - For information about supported SFP transceivers, see
sk92755.
USB port 3.0 for software download.
Press and hold the button 12 seconds to restore the appliance to its
factory default.
All user parameters previously configured are removed.
Shows the regulated module, serial number, and the MAC address.
For rack mount.
Quantum Spark 1900 / 2000 Appliance Getting Started Guide | 44
Front Panel