Ultimea Apollo S50 U3600 - Soundbar Manual

ACCESSORIES LIST

PRODUCT CONTROLS

Control Panel

1. VOL+: Volume Up.
2. VOL-: Volume Down.
3. Power Button:
   Press to power on / Hold for 3 seconds to power off.
4. SOURCE:
   Press to switch channels: ARC-OPT (OPTICAL)-BT-AUX-USB.
   Hold for 3 seconds to disconnect the current device and connect to a new device manually on your mobile phone / PC / TV (BT ID: Apollo S50)

Remote Control

1. " ": Power Button
   Press to power on / Hold for 3 seconds to power off.
2. " ": eARC
   Press to switch to HDMI ARC channel.
3. " ": BT
   Press to switch to Bluetooth channel and enter pairing mode. Hold for 3 seconds to disconnect the current device and connect to a new device manually on your mobile phone / PC / TV (BT ID: Apollo S50).
4. " ": OPT
   Press to switch to OPTICAL channel
5. " ": AUX
   Press to switch to AUX channel.
6. " ": USB
   Press to to switch to USB channel
7. " ": LED
   Press to turn on the LED, press again to turn off.
8. "+": Volume Up
9. "-" Volume Down
10. " < ": Previous
    For BT and USB mode only: Skip to previous track.
11. " > ": Next
    For BT and USB mode only: Skip to next track.
12. " ": Play / Pause
    For BT and USB mode only.
    USB mode: Hold for 3 seconds to switch between single loop playback and list loop playback.
13. "MOVIE": MOVIE
    Press to switch to MOVIE mode, the display will show: " ".
14. ."GAME": GAME
    Press to switch to GAME mode, the display will show: " "
15. "MUSIC": MUSIC
    Press to switch to MUSIC mode, the display will show: " ".
16. " ": BASSMAX
    Press to adjust bass level, the display will show: " ", " ", " ", " ", " "
17. " ": Mute / Recover the volume.

DEVICE INSTALLATION

Assembly steps:

1. Align the joints of the two parts.
   
2. Twist to connect.
   
3. Plug in the Stereo RCA to RCA Audio Cable.
   

Detached and stand on base:

1. Set the soundbar on the base and align the joints.
   
2. Twist to connect with the base.
   
3. Plug in the Stereo RCA to RCA Audio Cable.
   

CONNECT TO SUBWOOFER

CONNECT TO TV VIA HDMI OUT ARC

1. Connect one end of the HDMI cable to the eARC/ARC port on the back of your TV.
   
2. Then connect the other end into the ARC port of the soundbar.
3. Press "ARC" button on the remote control to select "ARC" input.
   

If there is no sound, try setting the TV audio output to PCM:
TV Settings > Home > Settings > Sound > Digital Audio Output > PCM

Note: Please turn on the "CEC" function on your TV.
When eARC / ARC is connected, your TV remote control can control the soundbar and TV simultaneously:

1. Turn on/off
2. Adjust the volume

CONNECT TO TV VIA OPTICAL / AUX

OPTION 1: OPTICAL

1. Make sure the TV's port is OPTICAL OUT, connect both sides of the cable to OPTICAL, for both the TV and the soundbar.
2. Make sure the optical plug is inserted correctly as it shows in the picture. Do not insert the plug upside down and break the optical

Note: If audio is playing from the internal TV speakers, mute or minimize the TV volume.

OPTION 2: AUX

1. Connect the 3.5mm to 3.5mm RCA audio cable to connect to your TV's RCA AUDIO OUT port
2. Make sure the color of the cables ends matches the color of the TV ports

Note: Please remember to unplug the AUX cable from TV and Soundbar when you want to switch other mode.

In Optical Mode: If there is no sound, try setting the TV audio output to PCM: TV Settings > Home > Settings > Sound > Digital Audio Output > PCM

CONNECT TO BLUETOOTH

1. Press the " " button on the soundbar or press the " " button on the remote control to enter Bluetooth pairing mode.
   
2. Go to the Bluetooth setting on your phone, find and select "Apollo S50" to connect the soundbar.
   

Note: If it's already in the Bluetooth mode and connected, press and hold " " button for 3 seconds to disconnect current device and choose to connect to a new device manually on your mobile phone / PC / TV

PLACEMENT OPTIONS

Note: The soundbar should be placed at or near ear level.

WALL MOUNT INSTALLATION

SPECIFICATIONS

SAFETY INSTRUCTIONS

Please read this user manual carefully and save it for future reference.
Do not make unauthorized alterations to the product, doing so may compromise safety, regulatory compliance, system performance, and may void the warranty

• Avoid dropping
• Do not disassemble.
• Do not submerge in water
• Avoid extreme temperatures.
• Do not use the device outdoors during thunderstorms.
• Use original or certified cables.
• Do not place dangerous items on top of this device (e.g.liquid filled objects, lit candles).
• Clean with a dry, soft lint-free cloth. Do not use any corrosive cleaner or oil.
• To avoid hearing damage, do not listen for extended periods at high volume.
• Do not expose the batteries to extreme heat sources suchas direct sunlight or open flames.
• The ideal operating temperature for this product and its accessories is between 41°F/5°C and 95°F/35°C
• The adapter should be installed near the device andshould be easily accessible.
• Do not use this product in environments of extreme heat or cold. Never expose this device to strong sunshine or wet environments

Manufacturer: Dynanic (Shenzhen) Technology Limited
Address: 20th Floor, Building 4, Tianan Cloud Park, Bantian St.,
Longgang District, Shenzhen, China 518000

If you need our support, kindly reach out to our service team. We are always glad to help.
+1 888-598-8875 (US)
Mon-Fri 9am-5pm (PST)
+49 89-628-25828 (EU)
Mon-Fri 9am-5pm (CET)
support@ultimea corn
support@ultimea de

@uItimea_OfficiaI

Prefer video tutorial?
Setup guidance video, USER MANUAL or Trouble Shooting on ULTIMEA website.

support.ultimea.com
support.ultimea.de

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Ultimea Apollo S50 U3600 - Soundbar Manual