Table of Contents
Advertisement
en-us Transportation, storage and disposal
NOTICE: Escaping water may cause material damage.
1.
Do not open the door if you can see water through
▶
the glass.
Pull the emergency release downwards with a tool and
release.
a The door lock is released.
Insert the service flap and lock it into place.
2.
Close the service flap.
3.
Transportation, storage and disposal
18 Transportation, storage and
disposal
Transportation, storage and disposal
18.1 Removing the appliance
Turn off the faucet.
1.
Empty the water inlet hose.
2.
Switch off the appliance.
3.
→ "Switching off the appliance", Page 23
Unplug the appliance's mains plug.
4.
Drain the water.
5.
→ "Cleaning the drain pump", Page 25
Detach the hoses.
6.
32
18.2 Inserting the transit bolts
Secure the appliance before transportation using transit
bolts in order to prevent transport damage.
Use a screwdriver to remove the 4 cover caps.
1.
Keep the cover caps.
Insert the 4 transit bolts.
2.
→ "Removing the transit bolts", Page 10
18.3 Using the appliance again
For further information, see
▶
→ "Installation and connection", Page 8 and
→ "Starting an empty washing cycle", Page 13 .
18.4 Disposal of your old appliance
Environmentally compatible disposal allows valuable raw
materials to be recycled.
WARNING
Children can lock themselves in the appliance, thereby
putting their lives at risk.
Do not install the appliance behind a door as this may
▶
obstruct the appliance door or prevent it from opening.
With redundant appliances, pull out the mains plug of
▶
the power cord, cut through the power cord and remove
the appliance door.
Unplug the appliance from the power supply.
1.
Cut through the power cord.
2.
Remove the appliance door.
3.
Dispose of the appliance in an environmentally
4.
responsible manner.
Information about current disposal methods can be
obtained from your specialist dealer or local authority.
Advertisement
Table of Contents
