Table of Contents
Advertisement
en-us Installation and connection
37.0" (94.0 cm)
A
26.0" (66.0 cm)
B
63.0 sq. in. (404.0 cm²)
C
6.25" (16.0 cm)
D
2.5" (6.4 cm)
E
0.6" (1.5 cm)
2
F
2.4" (6.1 cm)
G
1
Minimum area for each ventilation opening.
2
Valid for both sides of the appliance
The specified dimensions of the ventilation opening
applies to each position and must not be divided between
the upper and lower positions.
The specified dimensions of the ventilation openings apply
to each position and must not be divided between the
upper and lower positions.
Installation in an open cabinet
C
34.5" (87.6 cm)
A
23.8" (60.5 cm)
B
28.0" (71.1 cm)
C
4.5 Removing the transit bolts
The appliance is secured for transportation using transit
bolts on the rear of the appliance.
Note: Keep the transit bolt screws and the sleeves in a
safe place for future transport.
→ "Inserting the transit bolts", Page 32
10
1
B
A
Pull the hoses out of the holders.
1.
Unscrew
and remove
2.
transit bolts using a 13 mm wrench.
Remove the power cord from the holder.
3.
all of the screws for the 4
Advertisement
Table of Contents
