Table of Contents
Advertisement
Remove the 4 sleeves.
4.
Put on the 4 cover caps.
5.
Push the 4 cover caps downwards.
6.
Note: To install the transport locks to transport the
appliance, perform these steps again in the reverse order.
4.6 Connecting the appliance
Connecting the water inlet hoses
Connect the water inlet hose for hot water
1.
cold water
(blue) to the appliance.
Connect the water inlet hose for hot water
2.
cold water
(blue) to the faucet (26.4 mm = 3/4").
If there is no faucet for hot water, only connect the
water inlet hose for cold water. Cover the hot water
connection on the appliance in order to protect it from
dirt.
Tip: To protect against dirt, use a 3/4" end cap on the
hot water connection of the appliance.
Open the faucets carefully and check that the
3.
connection points are tight.
Water outlet connection types
This information is intended to help you to connect this
appliance to the water outlet.
NOTICE:
When draining, the water drain hose is subject to water
pressure and may come loose from the installed
connection point.
Secure the water drain hose against unintentional
▶
loosening.
Installation and connection en-us
(red) and
(red) and
11
Advertisement
Table of Contents
