Names And Functions Of Parts - Canon imageFORMULA P-215II User Manual

Names and Functions of Parts

This section describes the name and function of each part. Make
sure to read this section and familiarize yourself with the parts of the
scanner before using the scanner.
Front View/Right-Side View
(1) Document Feed Tray
This tray is for feeding documents. Open it when scanning
documents.
(2) Feed Tray Release Lever
Press this lever to release the document feed tray when opening the
tray.
(3) Document Guides
These guides ensure documents are fed straight (one on the left and
right sides). Raise the guides when loading a document, and then
align them to both sides of the document to be scanned.
(4) Feeder Cover Release Lever
Pull this lever to open the feeder cover when cleaning the scanner.
(5) Feeder Cover
Open this when cleaning the scanner.
(6) Eject Outlet
This outlet is for ejecting documents when scanning is completed.
(7) Card Slot
Insert plastic cards here.
(8) Card Guides
These guides ensure that cards inserted in the card slot are fed
straight.
(9) Feed Extension Plate
Open this plate to support the document when loading a long
document.
(10) Feed Inlet
Insert the document to be scanned.
(11) Start Button
Press this button when you want to start scanning the document
loaded in the feed tray.
When the power of the scanner is ON, this button lights and indicates
the status of the scanner as shown below.
Start button
status
Lit The power of the scanner is ON.
• Paper is jammed.
• A double feed has been detected and the
Flashing
• The top unit is open.
• Another scanner error has occurred.
The Start button may blink slowly when the USB cable is connected and
the feed tray is opened. When this occurs, wait for the power indicator to
stop blinking and light steadily before using the scanner.
7
Meaning
scanner has stopped.