3. Run the CloudLED.exe from Command Prompt or PowerShell with administrative rights. Run the following commands:
● CloudLED.exe ON
● CloudLED.exe OFF
TPM support
Windows 10 IoT Enterprise LTSB 2016 supports TPM 2.0. For more information about TPM resources, see
technet.microsoft.com/en-us/library/cc749022.
System shutdown and restart
Click Start > Power, and then click Restart or Shutdown to restart or shutdown the Edge Gateway, respectively.
LAN and WLAN network configuration
In the Search box, type Settings and open the Settings window. Select Network & Internet to configure the network.
Bluetooth configuration
In the Search box, type Settings and open the Settings window. Select Devices, and then select Bluetooth from the menu
on the left panel to configure the network.
WWAN (5815) network configuration
NOTE:
Ensure that the micro-SIM card is already activated by your service provider before using it in the Edge Gateway.
For more information, see
Follow these steps after installing the micro-SIM card:
1. In the Search box, type Settings and open the Settings window.
2. Select Network & Internet.
3. Locate the WWAN connection in the Wi-Fi section and select the entry to connect and disconnect from the WWAN adapter.
Ethernet configuration
1. In the Search box, type Settings and open the Settings window.
2. Select Network & Internet.
3. Select Ethernet, then Change adapter options to change Ethernet settings such as the duplex configuration.
Ubuntu Core 16
Overview
Ubuntu Core 16 is a Linux OS distribution that is an entirely new mechanism for managing IOT systems and its applications. For
more information about Ubuntu Core 16 OS, see
●
www.ubuntu.com/cloud/snappy
●
www.ubuntu.com/internet-of-things
activate your mobile broadband
service.
Setting up the operating system
49