Right View - Dell Edge Gateway 3003 Installation And Operation Manual

Table 4. Status-light indicators (continued)
Function
NOTE: The power and system status light may operate differently during different boot-up scenarios, for example, when a
USB script file is run during boot-up.
Table 5. Power connector pin definition details
Pin
1
2
3
NOTE: Pin 3 (IG) is connected to the vehicle's ignition status indicator (optional) or a wake pin. A voltage of more than 9 V
on the signal indicates that the vehicle's engine is running. The Ignition or Wake pin is used to prevent the draining of the
vehicle battery when the vehicle is turned off for an extended amount of time.
NOTE: The IG signal can be used to gracefully shutdown or enter low-power state when the vehicle is turned off (battery
powered). It can also be used for powering on the Edge Gateway when the vehicle starts.

Right view

Table 6. Right view—3003
Features
1 Audio line-out (GREEN)
Indicator
Activity
Signal
DC+
DC–
IG
Color
Green
Connect audio-output devices such as speakers and amplifiers.
Control
Driver (LAN)
Function
12–57 VDC power
Ground
9–32 VDC ignition
Status
On (Amber): Low-
speed connection (10
Mbps)
Off: No activity on link
Blinking Green: LAN
activity. The blink rate
is related to packet
density.
System views 9