Table of Contents
Advertisement
Watchdog Timer
The Watchdog Timer for Windows 10 IoT Enterprise LTSB 2016 is controlled through the BIOS setting. Enter the BIOS
during boot by pressing F2. The Watchdog Timer is enabled and disabled under the BIOS setting Watchdog Timer.
TPM Support
Windows 10 IoT Enterprise LTSB 2016 supports TPM 2.0. For more information about TPM resources, see
technet.microsoft.com/en-us/library/cc749022(v=ws.10).aspx.
System Shutdown and Restart
Click the Start Icon and then press Power then Restart or Shutdown the Edge Gateway.
LAN/WLAN Network configuration
Click the Start Icon and then type Settings and open the Settings window. Select Network & Internet from the
settings menu.
Bluetooth configuration
Click the Start Icon and then type Settings and open the Settings window. Select Devices from the settings menu
and then select Bluetooth from the menu on the left panel.
DW5815 Network configuration
Follow the Service Manual to install and configure the WWAN module and the corresponding carrier SIM card for the
system. After the WWAN module and the SIM cards are installed:
1.
Click the Start Icon and then type Settings and open the Settings window.
2.
Select Network & Internet from the Settings menu.
3.
Locate the WWAN connection in the Wi-Fi section and select the entry to connect and disconnect from the
WWAN adapter.
Snappy Ubuntu Core Series 16
Overview
Snappy Ubuntu Core Series 16 is a Linux OS distribution that is an entirely new mechanism for managing a system and
its applications. For more information on Snappy Ubuntu Core Series 16 OS, see
·
www.ubuntu.com/cloud/snappy
·
www.ubuntu.com/internet-of-things
Pre-requisites
Infrastructure
An active connection to the internet is needed to update the Snappy Ubuntu Core Series 16 operating system as well as
applications (snaps)
Prior knowledge
· Familiarity with Unix\Linux commands
· Knowledge of how to use the serial communication protocol
· Knowledge of how to use a terminal emulator (for example; PuTTY)
· Knowledge of your network settings (proxy URL, ports, name servers, and so on)
Boot up and log in
NOTE: The Snappy Ubuntu Core Series 16 operating system has no graphical user interface
Turn on the Edge Gateway and when prompted log in to the OS using the default credentials. The default user name and
password for Ubuntu Core Series 16 is admin.
46
Advertisement
Table of Contents
