Top Cover And Keyboard - HP ENVY x360 Maintenance And Service Manual

1. Remove the three Phillips M2.0 × 2. 1 broad head screws (1) that secure the touchpad to the
computer.
2. Remove the four Phillips M2.0 × 2.9 screws (2) that secure the touchpad and bracket to the
computer.
3. Remove the touchpad bracket (3).
NOTE:
4. Lift the rear edge of the touchpad (4) until it rests at an angle.
5. Remove the touchpad (5) by sliding it up and back at an angle.
To replace the touchpad and bracket, reverse the removal procedures.

Top cover and keyboard

The top cover and keyboard remains after removing all other spare parts from the computer. In this
section, the first table provides the main spare part number for the top covers and keyboards. The
second table provides the country codes.
Table 5-16
Description
Top cover and keyboard with backlight in glacier silver finish with soft gray keys (includes backlight
cable and keyboard cable)
Top cover and keyboard with backlight in meteor silver finish with soft gray keys (includes backlight
cable and keyboard cable)
Table 5-17 Spare part country codes
For use in country or
region
Belgium
60 Chapter 5 Removal and replacement procedures for authorized service provider parts
The touchpad bracket is not available as a spare part.
Spare part For use in country or
number region
-A41 Israel
Spare part For use in country or
number region
-BB1 Spain
Spare part number
N91050-xxx
N91051-xxx
Spare part
number
-071