Magtek SDK MagneFlex Powder Programmer's Manual page 64

Appendix A – TLV Data Format
"MaxPinLength": ,
"MinPinLength": ,
"Options": ,
"Tones": ,
"CloseDevice": ,
"EndSession": ,
"EndSessionDisplayMessage":
}
Parameter
(Type)
DeviceID
(String)
WaitTime
(Integer)
PinMode
(Integer)
MaxPinLength
(Integer)
MinPinLength
(Integer)
Options
(Integer)
Tones
(Integer)
CloseDevice
(Boolean)
EndSession
(Boolean)
SDK - MagneFlex Powder, Middleware| PIN PEDs | Programmer's Manual ( MagneFlex Powder V2 API )
Page 64
URI of the device. See DeviceID URI for details.
Time in seconds the device will wait for the action to be completed.
(1 - 255)
Message to display as a user prompt:
0 = PINMsgEnterPIN
1 = PINMsgEnterPINAmt
2 = PINMsgReenterPINAmt
3 = PINMsgReenterPIN
4 = PINMsgVerifyPIN
Maximum PIN length. Must be less than 13.
Minimum PIN length. Must be greater than 3.
PIN verification and format:
0 = ISO0 Format, No verify PIN
1 = ISO3 Format, No verify PIN
2 = ISO0 Format, Verify PIN
3 = ISO3 Format, Verify PIN
Tones to use:
0 = No sound
1 = One beep
2 = Two beeps
Close the connection to the device after the request is processed.
false = Do not close the device. (default)
true = Close not device.
Sends an EndSession command after the request is processed.
false = Do not end the session. (default)
true = End the session.
Description