3 - MagneFlex Powder V2 Resources – DynaFlex devices
Parameter
(Type)
DeviceID
(String)
ResultStatus
(Boolean)
ResultMessage
(String)
PINOutput
State
(Integer)
PINBlock
(Hexadecimal string)
KSN
(Hexadecimal string)
Format
(Integer)
EncryptionType
(Integer)
OperationStatus
(Integer)
Example Request/Response:
{
"DeviceID": "",
"WaitTime": 10,
"PINMode": 0,
"MaxPINLength": 8,
"MinPINLength": 4,
"Format": 0,
"PAN": "923456789012",
"Options": null
}
SDK - MagneFlex Powder, Middleware| PIN PEDs | Programmer's Manual ( MagneFlex Powder V2 API )
Page 27
Device ID returned from RequestDeviceList.
Status of the operation.
false = fail
true = success
Message explaining the status of the operation.
Container for the PIN data. Reserved for future use.
PIN session state.
0 = Unknown
1 = Started
2 = End
PIN block data
Key serial number
PIN block format.
0 = ISO0 Format, No verify PIN
1 = ISO3 Format, No verify PIN
2 = ISO0 Format, Verify PIN
3 = ISO3 Format, Verify PIN
Encryption type.
128 = Data
129 = PIN
Status of the operation
Description
Need help?
Do you have a question about the SDK MagneFlex Powder and is the answer not in the manual?