Table of Contents
Advertisement
3 - MagneFlex Powder V2 Resources – DynaFlex devices
MessageID
(Integer)
SDK - MagneFlex Powder, Middleware| PIN PEDs | Programmer's Manual ( MagneFlex Powder V2 API )
Page 14
Value representing the message.
For DynaFlex family:
0x01 = "AMOUNT"
0x02 = "AMOUNT OK?"
0x03 = "APPROVED"
0x04 = "CALL YOUR BANK"
0x05 = "CANCEL OR ENTER"
0x06 = "CARD ERROR"
0x07 = "DECLINED"
0x08 = "ENTER AMOUNT"
0x09 = reserved, do not use.
0x0A = reserved, do not use.
0x0B = "INSERT CARD"
0x0C = "NOT ACCEPTED"
0x0D = reserved, do not use.
0x0E = "PLEASE WAIT"
0x0F = "PROCESSING ERROR"
0x10 = "REMOVE CARD"
0x11 = "USE CHIP READER"
0x12 = "USE MAGSTRIPE"
0x13 = "TRY AGAIN"
0x14 = "WELCOME"
0x15 = "PRESENT CARD"
0x16 = "PROCESSING"
0x17 = "CARD READ OK - REMOVE CARD"
0x18 = "INSERT OR SWIPE CARD"
0x19 = "PRESENT ONE CARD ONLY"
0x1A = "APPROVED PLEASE SIGN"
0x1B = "AUTHORIZING PLEASE WAIT"
0x1C = "INSERT, SWIPE OR TRY ANOTHER CARD"
0x1D = "PLEASE INSERT CARD"
0x1E = Null prompt (empty screen)
0x1F = reserved, do not use.
0x20 = "SEE PHONE"
0x21 = "PRESENT CARD AGAIN"
0x22 = "INSERT/SWIPE/TRY OTHER CARD"
0x23 = "TAP or SWIPE CARD"
0x24 = "TAP or INSERT CARD"
0x25 = "TAP, INSERT or SWIPE CARD"
0x26 = "TAP CARD"
0x27 = "TIMEOUT"
0x28 = "TRANSACTION TERMINATED"
For DynaPro family:
0x00 = "Blank"
0x01 = "Approved"
0x02 = "Declined"
0x03 = "Cancelled"
0x04 = "Thank You"
0x05 = "PIN Invalid"
Advertisement
Table of Contents
Need help?
Do you have a question about the SDK MagneFlex Powder and is the answer not in the manual?
Questions and answers