Magtek SDK MagneFlex Powder Programmer's Manual page 15

3 - MagneFlex Powder V2 Resources – DynaFlex devices
Return value:
{
"DeviceID": "",
"ResultStatus": ,
"ResultMessage": ""
}
Parameter
(Type)
DeviceID
(String)
ResultStatus
(Boolean)
ResultMessage
(String)
Example Request/Response:
{
"DeviceID": "",
"WaitTime": 5,
"MessageID": 1
}
{
"DeviceID": "[USB DynaFlex] B62CA53",
"ResultStatus": true,
"ResultMessage": "feature_display_message,status_timed_out"
}
SDK - MagneFlex Powder, Middleware| PIN PEDs | Programmer's Manual ( MagneFlex Powder V2 API )
Page 15
0x06 = "Processing"
0x07 = "Please Wait"
0x08 = "Hands Off"
0x09 = "PIN PAD not available"
0x0A = "Call Your Bank"
0x0B = "CARD ERROR"
0x0C = "Not Accepted"
0x0D = "Processing Error"
0x0E = "Use CHIP READER"
0x0F = "Refer to your payment device"
0x80..0x83 = Bitmap in slots 1..4
0xFF = Custom Bitmap Message
Device ID returned from RequestDeviceList.
Status of the operation.
false = fail
true = success
Message explaining the status of the operation.
Description