Magtek SDK MagneFlex Powder Programmer's Manual page 10

2 - How to Set Up the MagneFlex Powder V2 API
6) In the left side navigator, select
7) Make sure Bluetooth is turned on and close the
8) If using DynaMax, place it into pairing mode by switching it on.
9) If using DynaFlex II Go, place it into pairing mode by pressing and holding its power button until 4
beeps and release the button. The 4th LED will blink green.
10) Launch the Windows
a) Enter desktop mode by swiping in from the left side of the touchscreen.
b) Touch the Bluetooth icon in the system tray and select
2-1).
Figure 2-1 - Launch Manage Bluetooth Devices App from Desktop Mode
SDK - MagneFlex Powder, Middleware| PIN PEDs | Programmer's Manual ( MagneFlex Powder V2 API )
Page 10
PC and devices
Manage Bluetooth Devices
> .
Bluetooth
PC and devices app.
app by following these steps:
Add a Bluetooth Device (see Figure