Requestcardswipe - Magtek SDK MagneFlex Powder Programmer's Manual

Appendix A – TLV Data Format
None
Example Request:
{
"DeviceID": "",
"EndSessionDisplayMessage": 0
}
4.4

RequestCardSwipe

Prompts for a magnetic card swipe.
Using Method POST:
api/mtppscrahost/RequestCardSwipe
{
"DeviceID": "",
"WaitTime": ,
"DisplayMessage": ,
"Tones": ,
"FieldSeparator": "",
"CloseDevice": ,
"EndSession": ,
"EndSessionDisplayMessage":
}
Parameter
(type)
DeviceID
(String)
WaitTime
(Integer)
DisplayMessage
(Integer)
Tones
(Integer)
FieldSeparator
(String)
CloseDevice
(Boolean)
SDK - MagneFlex Powder, Middleware| PIN PEDs | Programmer's Manual ( MagneFlex Powder V2 API )
Page 46
URI of the device. See DeviceID URI for details.
Time in seconds the device will wait for the action to be completed.
(1 - 255)
Message to prompt the user with:
0 = Swipe Card / Idle alternating
1 = Swipe Card
2 = Please Swipe Card
3 = Please Swipe Card Again
4 = Chip Error, Use Mag Stripe
Tones to use:
0 = No sound
1 = One beep
2 = Two beeps
Delimiter to separate the output data for CardData.
Close the connection to the device after the request is processed.
false = Do not close the device. (default)
true = Close the device.
Description