Magtek SDK MagneFlex Powder Programmer's Manual page 36

3 - MagneFlex Powder V2 Resources – DynaFlex devices
WaitTime
(Integer)
PaymentMethods
(Array of string)
QwickChipMode
(Boolean)
TransactionType
(Integer)
Amount
(Decimal)
CashBack
(Decimal)
AdditionalTags
(String)
AdditionalRequestData
(name/value pairs)
SDK - MagneFlex Powder, Middleware| PIN PEDs | Programmer's Manual ( MagneFlex Powder V2 API )
Page 36
Time in seconds to complete the operation.
(1 - 255)
List of payment methods.
MSR = For magnetic stripe cards.
Contact = For EMV chip cards.
Contactless = For NFC contactless cards.
In QwickChip mode, the device does not prompt for an amount. Device
sends an ARQC request to the host. Device automatically populates the
ARPC response data with EMV Tag 8A set to "Z3". Card holder is
prompted to remove the card. Transaction result is later determined by the
processor and not by the card.
false = Do not enable QwickChip mode.
true = Enable QwickChip mode. Default.
Type of transaction to be used:
0x00 = Purchase
0x01 = Cash Advance
0x02 or 0x09 = Cashback
0x04 = Goods (Purchase)
0x08 = Services (Purchase)
0x10 = International Goods (Purchase)
0x12 = Cash Manual
0x20 = Refund (Chip Card Contactless Only)
0x40 = International Cash Advance or Cash Back
0x50 = Payment (Chip Card Contact Only)
0x80 = Domestic Cash Advance or Cash Back
The amount to be used and authorized, EMV Tag 9F02. Format in
decimal.
Amount of cash back to be used, EMV Tag 9F02. Format in decimal.
Additional transaction TLV data objects to include in the start transaction
request and ARQC.
Example:
Single tag - "5F2A020840"
Multiple tags - "5F2A0208405F360102"
No additional tags - ""
Supported tags:
•
9F7C Merchant Custom Data
•
5F2A Transaction Currency Code
•
5F36 Transaction Currency Exponent
•
9F53 Transaction Category Code
•
9F15 Merchant Category Code
•
9F16 Merchant ID
Additional name/value pairs of data to be forwarded in the transaction.