Getting Started - Philips sonicare DiamondClean Essential 7000 Series Manual

Getting started

Attaching the brush head
C 2
Using your Philips Sonicare toothbrush
Brushing instructions
1 Align the brush head so the bristles point in the same
direction as the front of the handle.
2 Firmly press the brush head down onto the metal
shaft until it stops.
Note: It is normal to see a slight gap between the brush
head and the handle. This allows the brush head to
vibrate properly.
If you are using your Sonicare toothbrush for the first
time, it is normal to feel more vibration than when using
a non-electric toothbrush. It is common for first time
users to apply too much pressure. Only apply gentle
pressure and let the toothbrush do the brushing for you.
Please follow brushing instructions below for the best
experience. To help you transition to your new Sonicare
power toothbrush, it comes with the EasyStart feature
turned on. This feature gently increases the power over
the first 14 brushings to help you adapt to brushing with
a Philips Sonicare toothbrush.
1 Wet the bristles and apply a small amount of
toothpaste.
2 Press the power on/off button to turn on the Philips
Sonicare. Then select the brushing mode.
3 Place the toothbrush bristles against the teeth at a
slight angle (45 degrees), pressing gently to make the
bristles reach the gumline or slightly beneath the
gumline.
9
English