Toothbrush Handle; Brush Head - Philips sonicare DiamondClean Essential 7000 Series Manual

Toothbrush handle

Brush head

Charger
Storage
to clean your Philips Sonicare toothbrush may result in an
unhygienic product and damage to it may occur.
Warning: Do not clean the product or accessories
with sharp objects or in the dishwasher,
microwave, with chemicals or in boiling hot water
1 Remove the brush head and rinse the metal shaft area
with warm water. Make sure you remove any residual
toothpaste.
Caution: Do not push on the rubber seal on the metal
shaft with sharp objects, as this may cause damage.
2 Wipe the entire surface of the handle with a damp
cloth.
Note: Do not tap the handle on the sink to remove excess
water.
1 Rinse the brush head and bristles after each use.
2 Remove the brush head from the handle and rinse the
brush head connection with warm water at least once
a week. Rinse the travel cap as often as needed.
1 Unplug the charger before you clean it.
2 Wipe the surface of the charger with a damp cloth.
If you are not going to use the product for a long time,
unplug it, and clean it (see chapter 'Cleaning'). Store it in
a cool and dry place away from direct sunlight.
Charge the toothbrush regularly to prevent the battery
from discharging completely. A completely discharged
battery may fail to charge again.
17
English